Latest Designer Bathroom Ideas and How To Guides for your Home

An easy DIY job is laying laminate flooring. If the longest wall in the room you are working in is straight and true you can start immediately with the first row along that wall. Lay the first line with the grooved edge facing the wall and a plastic spacer in place every two feet. If the wall is uneven, lay out a line of laminate flooring and, touching the most prominent area, mark the line of the rest of the wall on the boards.

Get a scrap of wood the same width from the wall as the widest point, and use this as a guide to make a pencil mark along the length of the laminates. You should then cut the pieces with an electric jigsaw for ease.

As before, lay out the first length, separated from the wall by the spacer. Each piece of laminate will either snap together or be held in place with a little glue. Make sure you stagger the successive rows by about a foot so as to give them the appropriate look. You can now proceed to lay the rest of the flooring making sure to pack them firmly against each other.

Cutting around doorframes can be tricky, so either make a template of the section you need to cut out or saw a section off the architrave to the thickness of the board and push it underneath.  Once the floor is completely fitted you can then reattach the skirting boards or fill in the remaining gap with a half rounded moulding to hide the expansion space.